Have you noticed broken or chipped grout in your home? It looks terrible, right? Don’t fret! You don’t necessarily need to retile and re-grout the area, especially if the tiles are not compromised. You can actually use some of Grout Shield’s grout products with some grout and easily fill in holes, cracks and chips – this will not only save you hundreds of dollars, but it’ll save you lots of time, as well! By knowing how to fix your grout yourself and what cleaning and sealing products to use, you can have a practically brand-new looking home!

To repair grout on your own, here are a few simple steps to take to fix it without hiring a professional:

• Buy grout that matches your current grout (or as close as possible).
• Remove any loose or broken grout by using a grout saw.
• Clean the grout lines where you removed the damaged grout with some cold water and towel dry. Also, use Grout & Tile Deep Cleaner to clean the grout all over the room/area.
• Follow the grout instructions to prepare the mixture. Mix in Grout Shield’s color sealer if you want to change or match the color of your grout.
• Fill the grout lines with the grout and make sure the grout is level and straight. To do this, you use a grout float.
• Clean the tiles with a sponge or chamois of any grout that may have gotten on them by accident.

The Grout & Tile Cleaner will remove any excess dirt or grease from the old grout. This cleaner will also clean and remove any previous sealer that was on the grout. After the area is done being cleaned and has had time to dry, apply Grout Shield’s Clear Seal. This clear seal can be applied to new or older tile and grout installations. By properly sealing your grout, it will prevent it from getting stained or discolored.

If you’re thinking about renewing the look of your home, purchasing Grout Shield products will make your grout and rooms look brand new again. To purchase Grout Shield cleaners or sealers or learn more, click our grout products page or call 1-800-631-0716.

The post How to Restore Your Grout appeared first on Grout Shield | Grout Restoration System | Grout Cleaner.

From food to drinks, the kitchen is a messy area. Spills happen. You can drop a bottle or miss your plate. One condiment that is known for its stains is hot sauce. Not only is hot sauce spicy, it’s (usually) bright red, which can easily stain clothing, furniture, tile and grout. Hot sauce isn’t so hard to clean up and wipe off tiles, but it can be hard to clean out of grout because it absorbs into the grout lines.

Since grout is porous and usually light-colored, it will easily absorb the dark color of hot sauce and become discolored. With the right grout cleaning and sealing products, you can clean up the hot sauce and it will look like the spill never happened. Remember, you want to clean up spills immediately, so the stain is easier to clean up.

Our team at Grout Shield can help you get rid of hot sauce stains in grout for good. You’ll never know it was there! Hot sauce stains (or any stain) in your grout can make your home and grout look old and dirty, even if you clean it regularly.

Besides getting rid of the discoloration, Grout Shield products also rid the grout of bacteria and other harmful germs that get absorbed into the grout lines over time.

Most home-cleaning products and articles may tell you to clean up the stains with bleach, ammonia or white vinegar. Sure, these chemicals and products may work, but they also aren’t really cleaning the grout, and many of these chemicals can harm the grout and cause it to crack or break.

To remove the hot sauce, you will want to use Grout Shield’s Grout & Tile Deep Cleaner, which cleans and lifts deep and hard-to-clean stains out of the grout’s pores.

To use this cleaner, mix 1 ounce of the cleaner with 8 ounces of warm water. Then, brush the cleaner into the grout with a brush applicator. Let the mixture sit into the grout lines for a few minutes. Then, wipe away the cleaner with a sponge and towel dry the floor. The hot sauce stain will be gone.

Now, if the hot sauce stain still won’t fully disappear, you can make the grout color look like new again with Grout Shield’s color sealer. You just squeeze the sealer into the grout lines. Then, spread it into the grout lines with a brush applicator or your finger and wipe away the excess with a towel or chamois. You can choose any color in the world to recolor your grout. Check out our grout colors.

If you don’t need to recolor your grout, you should seal it with a clear grout sealer after cleaning it, to protect it from future spills and accidents. Next time rust spreads into your grout, the sealer will prevent the hot sauce  from seeping into the grout lines, and you can clean up the sauce with no stains left behind.

Check out the video below to see how easy it is to use and apply Grout Shield’s Grout & Tile Deep Cleaner and the color sealer.

Our cleaners and sealers are simple to use and apply. We guarantee the hot sauce will be gone! Your kitchen will look clean and refreshed, and you can enjoy hot sauce without worrying about staining your kitchen ever again! For more information on Grout Shield products, click our grout cleaning product page, or call toll free at 1-800-631-0716.

The post How to Clean Hot Sauce Out of Grout appeared first on Grout Shield | Grout Restoration System | Grout Cleaner.